【光電測量產品】
光源 真空紫外光譜儀 訂制光譜儀 軟X射線光譜儀 拉曼光譜儀 紅外\紫外激光觀察儀 夜視儀器 HPLC熒光光度計 CCD相機 動態光散射 高速攝影照相機 光纖光譜儀 海洋系列光譜儀 光譜系統 原子力顯微鏡 探測器 濾光片 紅外光譜儀 單色儀 光柵 照度計 光信號電子學儀器 工業內窺鏡 薄膜測量 PC示波器 數字記錄儀 遠紅外太赫茲光譜儀 太陽光模擬器 袖珍數碼顯微鏡相機 壓電陶瓷 紫外線固化機 紫外反射鏡 濾光片測量儀 電動位移臺/電控位移臺 納米位移臺 光電探測器 均勻光源
【激光系列產品】
光纖激光器 多模泵浦激光器 激光二極管未封裝bar 激光二極管冷卻裝置 激光器電源 氦氖激光器 CO2激光器 半導體泵浦激光器 氬離子激光器 氦鎘激光器 氮分子激光器 皮秒激光器 激光二極管電源 激光光譜測量 激光能量計/功率計 激光雕刻、打標、切割機 激光二極管模塊 深紫外、紫外固體激光器 信號發生器 超快飛秒激光器 熱電制冷產品 激光光束定位系統 激光光束分析儀 視頻顯微鏡測量系統 激光準直器 多通道激光功率計 半導體激光器 激光測距儀 紅外激光顯示卡 調Q激光器 激光護目鏡 光學平臺 光學調整架 光學微調架 可調嵌入式光學調整架 傾斜位移臺 通用調整臺 光學延遲線 手動位移臺 XY位移臺 光學旋轉臺 角位移調整臺 激光器附件 可變光闌 擴束鏡 拉曼激光器 大功率光纖耦合激光器 單模垂直腔面發射激光器
【分析儀器產品】
電化學檢測儀器 電泳系列儀器 分光光度計 色度計 濁度計 注射泵 紫外臺 凝膠成像系統 分析儀 ICP電感耦合 氣相色譜儀 HPLC高效液相色譜 紅外光譜儀 電子鼻 傳感器 蒸發儀 凱氏定氮儀 熔點儀 干燥儀 熒光光度計 火焰光度計 熱分析儀 溶出度儀 X射線衍射儀 進樣器 X射線熒光光譜儀 全自動儀器 三維表面輪廓儀
【生化儀器產品】
恒溫孵育器 核酸蛋白分析儀 搖床 真空泵 槍頭、PCR附件 柱溫箱 冰箱 移液槍 低溫培養箱 生物芯片掃讀儀 工作臺 葉綠素效能熒光儀 動物注射泵 恒溫水浴 振蕩器 離心機
【元件耗材】
窗片 棱鏡 透鏡 激光棒 晶體 反射鏡 分光鏡 偏光鏡/偏光片 光學基片
【光通信儀器】
ASE光源 光接收機 光纖放大器 光發射機 光通信激光器 探測器
光電測量產品 >> 光譜系統 >> 光纖光損耗光譜測量系統 |
|
|
The Bentham Fibre Spectral Loss System is a modular system consisting of chopped light source, monochromator, launch optics, detector and lock-in amplifier. The whole system is controlled by a PC which also calculates loss in dB/km as a function of wavelength.
Spectrol Loss in fibres is usually measured by the cut-back method. Modulated while light is passed through a monochromator before being launched into one end of the fibre under test. The light emitted from the other end of the dibre is collected by a large area indium gallium arsenide or silicon detector and the resulting signla amplfied by a lock-in amplfier. The detector end of the fibre is then cut back by a known length and the cleaved end reinserted in the detector assembly. The spectral loss of the fibre is calculated from the two stored curves as follows:
Spectral Loss (dB/km) = log10 (short/long)/cutback
|
The prime system requirements are:
- light throughput of the monochromator
- stability of light output
- mechanical stability
|
The final signal-to-noise ratio and hence speed and accuracy of measurement is dominated by the level of light reaching the detector. In all real systems this light level is limited by the efficiency and light throughput of the monochromator.
When comparing various commercially available monochromators you find that most have an f number in the region of 4. It is a common misconception to assume that light throughput can be assessed by comparing f number alone. This is not the case. For a given spectral bandwidth, a large f/4 monochromator (long focal length, large mirrors and gratings) will operate with wider slits than a small f/4 unit. This wider slit allows more power through and into the fibre.
The Bentham system uses a 300mm focal length, f/4 monochromator to launch 5nW or -53dBm (cw) into a single mode fibre (1300nm, 10nm bandwidth).
|
Stability
Due to the sequential nature of the measurement, both optical and mechanical stability over the period of the two spectral runs is of critical importance.
For the Bentham range, optical stability is ensured by the IL1 light source, which uses a 100W QH lamp controlled by a highly stabilised constant current power supply. This power supply is at least 10 times more stable than a normal laboratory stabilised supply.
Mechanical instability in such systems results in short or long term wander of the focussed spot over the end of the fibre at the launch end. In the Bentham system the light source and launch optics are bolted firmly to the monochromator, which is constructed from a single rigid casting.
|
|
免責聲明:
本網站內容來源于網友提供和互聯網公開資料等,僅供參考。本網站不對網站所有信息的準確性、可靠性或完整性提供任何保證,交易匯款需謹慎,請注意調查核實。若文中涉及有違公德、觸犯法律的內容,一經發現,立即刪除,作者需自行承擔相應責任。涉及到版權或其他問題,請及時聯系,我們將在收到通知后第一時間妥善處理。