FBY-E系列 高精度數控單柱液壓機(PLC控制、人機界面)
FBY-E Series of High precision CNC single column hydraulic press (PLC control, man-machine interface)
(根據客戶需求可定做非標專機)
Non-standard press can be customized according to customer demand
產品特點 Product feature
1. C型單柱設計,機身整體鑄造,經過高溫時效處理,剛性好,變形量小。
The C-body design,whole body casting, After high temperature aging treatment,
,rigid and stable,The deformation is small
2. 采用PLC控制,在屏幕上任意設定動作速度、壓力、時間、下壓位置精度高,可靠性能好。
PLC control, on the screen can be arbitrary set speed,pressure, time,repeated high positioning accuracy, good performance.
3. 配有液壓系統傳感器和壓力傳感器,顯示實際壓力,可設置壓力檢測范圍,檢測壓裝的產品是否合格,產品在壓裝過程中超壓和欠壓都會自動報警并停機。
Equipped with sensors in hydraulic system and pressure sensors, display actual pressure, Pressure detection range can be set,Detection of press-fit products are qualified,Products in the process of pressing, overvoltage and undervoltage will automatically alarm and shutdown.
4. 全油壓系統,壓力大,工作性能穩定,壓力精度高、調節范圍大。
The whole hydraulic system, the pressure is strong, the work performance is stable, The accuracy of the pressure is high, the adjustment range is large.
5. 安全設計,采用全自動操作和雙手操作,設有急停及上下點動功能。
Security design, using both hands to operate, with emergency stop and jog up and down function.
6. 主軸下行時具有快進和增壓工進兩種速度,快進提高工作效率:增壓工進速度可任意調節,提高產品壓裝質量,保護模具和產品。
Spindle down, with two speeds ,fast-forward and slow forward , fast forward speed is fast and can improve work efficiency;Slow forward speed can be adjusted ,to improve the quality of press-fit, protection of mold and products.
7. 采用手動按鈕與腳踏兩種循環啟動方式。
Two of the cycle start-up mode: buttons and pedals
8. 整機控制系統采用進口高端名牌產品,PLC,觸摸屏采用西門子、三菱、威綸等高端品牌,液壓系統采用進口雙比例系統閥(具體配置見配置清單)。
The whole control system is using
9. 密封件采用日本NOK和臺灣鼎基。
The seal is NOK from Japan and Taiwan tripod base, hydraulic fittings using brand-name products of taiwan
10. 紅外線操作安全保護感應裝置(根據客戶需求選配)。
Infrared protection device (according to customer's requirements)
技術參數 Technical Parameters
Specifications |
規格 |
單位 |
FBY-E02 |
Rated oil pressure |
額定油壓 |
Mpa |
8 |
Theoretical outpute pressure |
理論壓力 |
KN |
20(2T) |
Max stroke |
最大行程 |
mm |
150 |
Max Opening Height |
最大開口高度 |
mm |
260 |
Throat depth |
喉深 |
mm |
140 |
Fast-forward speed |
快下速度 |
mm/s |
100 |
Working speed |
工進速度 |
mm/s |
5-50 |
Rturn speed |
回程速度 |
mm/s |
120 |
The heightofthe working table |
工作臺距地面高度 |
mm |
850 |
The size of the working table |
有效工作臺尺寸(前后*左右) |
mm |
275x500 |
Mold mounting hole |
模柄尺寸 |
mm |
¢22 |
Power of motor |
油泵電機功率 |
kw |
2.2 |
Power(3ΦAC,50Hz) |
電源(3ΦAC,50Hz) |
V |
380 |
Weight |
機床總重量(約) |
Kg |
490 |